20.2 fl. oz. (600 ml) or 50.7 fl. oz. (1500 ml) cartridges

Sika® AnchorFix-3001
High performance, 2 component adhesive anchor system use in cracked & uncracked concrete


Sika AnchorFix-3001 adhesive anchor system has been specially formulated as a high performance, two component adhesive anchor system for threaded bars and reinforcing bars in both cracked and uncracked concrete.

Where to Use

  • Cracked & uncracked concrete
  • Hard natural stone
  • Solid rock
  • Solid masonry


  • Fixing close to free edges
  • Versatile range of embedment depths
  • Anchoring without expansion forces


  • ESR to AC308 by ICC-ES (ESR-3608)
  • Certified to ANSI /NSF - 61 by IAPMO-R&T (file N-7858)
  • Sikadur AnchorFix-3001 has been tested according to ASTM C 881 Type I, IV, Class C, Grade 3


See Data Sheet


The design professional on the job is ultimately responsible for the interpretation of the data provided above.

Note: Sika AnchorFix-3001 has been qualified for resisting long-term leads through the ICC-ES AC308 creep test for which an anchor is loaded and monitored for movement over time. According to AC308, anchors that pass the creep test are determined to be suitable for resisting long- term tensile loads. n

  • Installation of anchors in horizontal or upwardly inclined orientations to resist sustained tension loads shall be performed by personal certified by an application certification program in accordance with ACI 318 D.9.2.2 or D.9.2.3
  • Please refer to section 5.0 for conditions of use in the ICC Evaluation Report #3608. This report is available on Sika and ICC's websites. For a complete list of tools and accessories, refer to ICC ESR #3608
  • Minimum application temperature: 40°F (4°C) n Maximum application temperature: 104°F (40°C)
  • For porous substrates, a mock up should be done to determine aethetic appeal